Start Rapid Limited

1. In the CNC machining project, try to avoid the high-speed vibration of the spindle, because the vibration in the machining will greatly affect the smoothness of the workpiece.

2. The chip removal groove for CNC machining shall be properly opened to avoid scratches on the workpiece caused by poor chip removal and affect the smoothness of the workpiece.

3. If the CNC machining center is placed unevenly, it will cause vibration and affect the finish of the workpiece. Therefore, it is necessary to ensure the stability of CNC machining center in order to better improve the smoothness of CNC machining of auto parts.

4. Before CNC machining, the spindle speed and feed speed of the lathe must be matched.

5. The chip removal groove for CNC machining shall be properly opened to avoid scraping of the workpiece caused by poor chip discharge and affecting the smoothness of the workpiece.

【back】

Prev：Principle sharing of 3D printing technology Next：Working principle and advantages of CNC machining